OPTIMOL OPTIGEAR® SYNTHETIC A are fully synthetic high performance gear oils with MICROFLUX TRANS® additives. They offer optimum wear protection under very extreme thermal loads and operating conditions such as vibrations, oscillating motions and shock loads.The wide range of temperature - especially in case of low starting temperatures - and the high load carrying capacity are special assets of these industrial gear oils. Thermally and mechanically stable polyalphaolefin and the MICROFLUX TRANS® additive combination adjust themselves to the changing operating conditions and actively prevent wear.

•    For especially highly loaded industrial gears - in case of great changes in temperature and extreme loads    For wind power stations, conveyor belts, crane control gears, lifts, rolling mills etc.
•    For highly loaded eccentrics, gear couplings, chain drives, robot drives and joints as well as positive power transmissions
•    For all types of rolling and sliding bearings, especially for tapered roller bearings in extruders, shaking screens, vibrators or for spindle presses
•    For transport systems operated during winter
    Especially suited for arctic countries such as Canada, North America and Scandinavia

•    good viscosity/temperature behavior, wide range of operating temperature•    excellent low-temperature behavior, easy starting, good fluidity at extremely low temperatures
•    optimum wear protection - smoothing of pitting and scoring
•    especially low coefficient of friction leading to reduced friction and energy costs, lowering of oil temperatures
•    significantly extended oil change intervals, reduced maintenance costs
•    shear-stable
•    high corrosion protection, compatible with non-ferrous metals
•    compatible with conventional paints and sealing materials      NOTES FOR USE•    Observe the viscosity specified by the machine manufacturer.•    Miscible with all gear oils based on mineral oil.•    Maximum performance is only guaranteed if not mixed with any other product.

  Unit Value Test method OPTIMOL OPTIGEAR®
SYNTHETIC A
  - 320 - Article no. - 5236 - Color -   visual Base -   - ISO viscosity group - 320 DIN 51519 Density at + 15°C/+ 59°F kg/m³ 870 DIN 51757 Kin. viscosity at +  40°C/+ 104°F mm²/s 330 DIN 51562 Viscosity index - 140 DIN ISO 2909 Pour point °C -36 DIN ISO 3016 Flash point °C 220 DIN ISO 2592 Copper corrosion protection - 1a ASTM D-130 SRV^® test run - test mode 5 ae:       300 N/50°C/122°F/ball/surface/2h µ 0.055 friction coefficient DIN E 51834 wear mm   0.5 a) ball/scar Ø     b) profile depth Pt µm   1 FZG test A/16.6/140 -     DIN 51354 Damage load stage   intensified       special test Grey staining test: failure load -   FVA information number sheet     No. 54 I-IV