TRAX  14  C  is  based  on    highly  refined  “white” paraffinic base stocks and special antioxidant, antirust, antifoam, antiwear and surfactant additives. It is
completely free of aromatic hydrocarbon and sulfur and it does not contain any hazardous chemicals.
Due the presence of non – ionic surfactant it can be easily removed by water.

TRAX 14 C is specific as lubricant oil in textile industry.
In particular it is suitable to lubricate plain and roll- bearings, cams, joints, needles, and any other coupler of textile machines.

Storage and disposal modalities

Keep the product in closed original packages in indoor storage at temperatures between +5 e +40°C. For correct storage no changes have been observed for minimum
two years.
Confer exhausted product complying with Local Regulation.

•    White colour avoids risk of staining.

•    Excellent corrosion and anti-wear protection. (especially on joints, needles, cams, ecc.).

•    Excellent adhesiveness and anti-dropping properties that allow to keep a right oil film even at high rotation speed and temperature.

•    Good elastomer compatibility.

•    High filterability properties.

•    Rapid air release and low foaming 

  Properties Unit Values Method Product ---- TRAX 14 C ---- ISO VG ---- 32 DIN 51511 Appearance ---- Clear FL Colour ---- 0 ASTM D 1500 Density at 20°C Kg/l 0.856 ASTM D 1298 Viscosity at 40°C mm2/s 31.88 ASTM D 445 Viscosity a 100°C mm2/s 5.88 ASTM D 445 Viscosity Index --- 130 ASTM D 2270 Pour point °C -18 ASTM D 97 Flash point COC °C 202 ASTM D 92 Reichert Wear mm2 20 FL Reichert Wear Kg/cm2 150 FL FL = Fuchs Laboratory